Operation Manual

Darning
* The darning foot is an optional
accessory not supplied with your
machine.
Set the machine as illustrated.
Move the drop feed control to left
side to lower the feed dogs. (1)
Remove the presser foot clamp. (2)
Attach the darning foot to the
presser foot holder. The lever (A)
should be behind the needle clamp
screw (B). Press the darning foot on
firmly from behind with your index
finger and tighten the screw (C). (3)
First sew around the edge of the
hole (to secure the threads). (4)
First row: Always work from left to
right. Turn work by 1/4 and oversew.
A darning ring is recommended for
easier sewing and better results.
Set pattern selector on "A".
aa
bb
a
b
1
00
- A -
A
B
C
3
4
33
2