Operation Manual

Sewing with the hemmer foot

* The hemmer foot is an optional accessory not

supplied with your machine.

For hems in fine or sheer fabrics.

Set the machine as illustrated. Pattern selector on "A".

Neaten the edge of the fabric. At the beginning of the

hem, turn under the edge twice by about 3 mm (1/8")

and sew 4-5 stitches to secure. Pull the thread slightly

towards the back. Insert the needle into the fabric,

raise the presser foot and guide the fold into the scroll

on the foot. (1)

Gently pull the fabric edge towards you and lower the

presser foot.

Begin sewing, guiding the fabric into the scroll by

holding it upright and slightly to the left. (2)

- A -

0 1~4