Operation Manual

Automatic needle threader (optional)
* The automatic needle threader is a factory
installed option. If your machine has this
option use the following instructions:
- Raise the needle to its highest position
- Press lever (A) right down
- The threader automatically swings to the
threading position (B)
- Take the thread round the hook (C)
- Take the thread in front of the needle so
that the thread will insert into the hook (D)
from bottom to top
- Release lever (A)
- Pull the thread through the needle eye.
Attention:
Turn power switch to "O"!
A
A
C
D
1
3
4
B
B
2
13