Operation Manual

Caution:

Always make sure that the machine is unplugged from

power source and the main switch is on "O" before inserting

or removing any parts and before cleaning.

Remove the stitch plate:

Cleaning the feed dog:

Cleaning and lubricating the hook:

Important:

Turn the handwheel until the needle is fully raised. Open the

hinged front cover and unscrew the needle plate screw withe

the screw driver. (1)

Remove the bobbin case and use the brush supplied to

clean the whole area. (2)

Remove the bobbin case. Snap the two hook retaining arms

(a) outwards. Remove the hook race cover (b) and the hook

2 drops) with sewing machine oil. Turn the handwheel until

the hook race (e) is in the left position. Replace the hook (c).

Replace the hook race cover and snap back the two hook

retaining arms. Insert he bobbin case and bobbin and

replace the stitch plate.

Fabric fluff and threads must be removed

regularly. Your machine should be serviced at regular

intervals at one of our service agencies.

Maintenance