Operation Manual

GB
41
* The darning foot is an optional accessory not supplied with your machine.
Set the machine as illustrated. Move the drop feed control to right side to
lower the feed dogs. (1)
Remove the presser foot clamp. (2)
Attach the darning foot to the presser foot holder. The lever (A) should be
behind the needle clamp screw (B). Press the darning foot on firmly from
behind with your index finger and tighten the screw (C). (3)
First sew round the edge of the hole (to secure the threads). (4) First row:
Always work from left to right. Turn work by 1/4 and oversew.
A darning ring is recommended for easier sewing and better results.
Free motion darning
E
* El pie para zurcido es un accesorio opcional no suministrado con su
máquina.
Regular la máquina según la ilustración. Deslice el control del transportador
de dientes al lado derecho para bajar los dientes. (1)
Quitar el porta-pie. (2)
Fijar el pie para zurcir en la barra prensatelas. La planca (A) tiene que estar
detrás, sobre el tornillo del porta-agujas (B). Apretar enérgicamente con el
indice contra la parte posterior del pie para zurcir y atornillar el tornillo (C). (3)
Primero coser alrededor del agujero (para aseguar los puntos). (4)
Primera serie: trabajar siempre de izquierda a derecha. Girar el trabajo de
1/4 y recubrir.
Para obtener un mejor resultado recomendamos un bastitdor.
0
1
2
3
4
S
0
0
05123 4
a
bb
a
b
2
1
4
3
A
B
C
Zurcido de brazo libre