Operation Manual

Left and right side balance for buttonhole
GB
34
Stitch density on right and left sides
of buttonhole can be adjusted by
buttonhole balance control dial.
This dial should usually be in a
neutral position (between "+" and "")
If the stitches on the left side of the
buttonhole are too close together,
turn the dial to the left (+).
* Turning dial to the left opens left
side.
If the stitches on the left side of the
buttonhole are too open, turn the
dial to the right ().
* Turning dial to the right closes left
side.
La densidad de la puntada en los
lados derecho e izquierdo del ojal
puede ajustarse por el mando de
control del balance del ojal.
Este selector debe estar normalmente
en una posición neutral. (entre "+" y
"")
Si las puntadas en la lado izquierdo
del ojal están demasiado próximas,
gire el dial a la izquierda (+).
* El giro del dial a la izquierda abre
el lado izquierdo.
Si las puntadas en el lado izquierdo
del ojal están demasiado abiertas,
gire el dial a la derecha ().
* El giro del dial a la derecha cierra
el lado izquierdo.
Balance a izquierda
y derecha para
coser ojales
E