Operation Manual

Threading the upper thread
GB
Caution:
Before threading, turn power switch to
"O".
Raise the needle bar to its highest
position. Follow exactly the numbered
threading sequence illustrated below.
If you skip a step or fail to properly
engage the thread in any of the thread
guides, the machine will not sew
properly. (1-5)
Continue to draw the thread down and
into the needle bar thread guide.
Insert the thread through the eye of
the needle from front to back. Leave
about 10 cm (4") of thread loose
behind the needle. (6)
14
2 3
6
54
1
Atención:
El interruptor principal debe estar en
"O". Subir el pié prénsatela.
Enhebre la aguja siguiendo es
procedimiento: Guía hilo de la parte
superior, regulador de tensión, resorte
del tensor del hilo, palanca tira hilos,
guía hilo del brazo, guía hilo de la
barra aguja. (1-5 ).
Enhebre la aguja pasando el hilo de
adelante hacia atrás por el ojo de la
aguja dejando aproximadamente 10
cm de hilo (6).
Enhebrado del hilo
superior
E