Operation Manual

Winding the bobbin
GB
11
Press the foot control gently. The bobbin will stop winding when
it is full. Push the bobbin to the left to "sewing position" and
remove it.
Please Note:
When the bobbin winder spindle is in "bobbin winding" position,
the machine will not sew-the hand wheel will not turn. To start
sewing, push the bobbin winder spindle to the left (sewing
position).
1
2
Place an empty bobbin on
the bobbin winder spindle.
Take the thread from the
spool through the bobbin
winder tension disc. (1)
Wind the thread a few
times by hand around the
empty bobbin in a
clockwise direction. Push
the bobbin to the right
towards the bobbin winding
position. (2)
Poner la bobina vacía en el eje de la devanadora (2).
Tirar el hilo de la bobina y hacerlo pasar por las guías (1) .
Enrollar el hilo a mano en la bobina en el sentido contrario a las
agujas del reloj. Poner en marcha el motor accionando el pedal.
Cuando la bobina esté llena el bobinado para automáticamente.
Cortar el hilo y sacar la bobina llena (2).
Bobinado del hilo inferior
E