Instructions / Assembly

Page 3Rev. 030620

1-888-651-3431

Assembly

Step 1. Attach the support plates

(E, F, G, H) to the carrier base (A)

using M5x12 bolts and lock nuts

(K). Do not fully tighten yet. Make

sure the reector supports are both

towards the front of the carrier.

Step 2. Attach the top frame (B) to the support plates using M5x12 bolts and lock nuts (K). After all

bolts and nuts are loosely secured, go back and securely tighten the hardware with a Phillips screw-

driver and M8 wrench.

Step 3. Carefully ip the assembly upside-down. Attach the hitch tube (D) to the basket assembly us-

ing the M6x45 bolts, washers, and nuts (J). Tighten securely with a 4mm hex key and 10mm wrench.

Make sure the hitch tube is pointing towards the back of the carrier (opposite side of reectors).

F F

G G

H H

(1)

(2a)

(3a)

(2b)

(3b)