Instructions / Assembly

Page 4Rev. 060518
DiscountRamps.com • 1-888-651-3431
Step 6. Adjust height of hold down inner arm
to best accommodate wheelchair (6a).
Step 1. Pull handle to tilt carrier into loading position.
Step 2. Push down on wheelchair handles, tilting the front wheels o󰀨 the ground. Roll wheelchair onto
carrier platform. With larger wheels in platform cradle, lift up on wheelchair handles. Carrier will tilt
and lock into position.
Step 7. Tighten support tube Allen wrench
set screws with 3/16” Allen wrench (7a).
(6a) (7a)
(1a) (1b)
Loading Wheelchair
(2a) (2b) (2c)