User's Manual

Network Relay Point (NRP) NIC 540 Labeling Product Requirements 17 December 2015 Silver Spring Networks 8
Network Relay Point (NRP) NIC 540 Labeling Product Requirements 2 About the Silver Spring Networks Network Relay Point (NRP) NIC
DRAFT
NIC Address Labeling
For radio identification, the street light equipment shall have an auxiliary label containing
the Silver Spring Networks NIC address presented in text (16 alphanumeric digits) and bar
code formats.
• Bar Code Type = Code 3 of 9
• Bar Code Font Size = unknown
• Font Type = unknown
• Font Size = unknown
• Bar Code Label Dimensions = 1.0ʺ x 1.5ʺ
• Bar Code Material Type = Static Dissipative Polyimide
Figure 2 shows an example of the NIC address label, which is consistent with FCC
requirements set forth in FCC and Industry Canada Government Guidelines on page 3, and
contains the Silver Spring Networks corporate name and NIC EUI-64 address.
NIC Labeling
The Silver Spring Networks Network Relay Point (NRP) NIC has a label relevant to a NRP
final assembly and RMA: the FCC and Part Number label and the Silver Spring NIC address
label. Both labels are located on the bottom side of the NIC PCA.
The FCC ID label is 1ʺ x .375ʺ inches (2.5 x 1 cm).
Figure 3 shows an example of the FCC ID label found on the NRP NIC.
Figure 2. Example of NIC address label for NIC 540
Figure 3. FCC ID label for NRP NIC
Silver Spring Networks
1234567890123456
Contains: 
FCC ID: OWS-NIC541 IC: 5975A-NIC541
Model No: NIC 541-0302

FCC ID: OWS-NIC541 IC:5975A-NIC541