User's Manual

MicroAP 5 Meter Labeling Product Requirements 1 March 2017 Silver Spring Networks 5
MicroAP 5 Meter Labeling Product Requirements 1 About MicroAP 5
Figure 3 shows an example of the NIC address label, which is consistent with FCC
requirements set forth in section 4.1, and contains the Silver Spring Networks corporate
name and NIC EUI-64 address.
The NIC address label shall be placed on the meter nameplate in the location identified by
“Label A” in the following figure.
NIC Labeling
The Silver Spring Networks MicroAP 5 has two labels relevant to meter final assembly and
RMA: the Regulatory/Catalog Number and the Silver Spring NIC address label. The
Regulatory/Catalog # label is located on the top side of the NIC PCA, the NIC address label is
located on the bottom.
Figure 3. Example of NIC address label for NIC 511-NA1-0313
Figure 4. Nameplate NIC address locations
Silver Spring Networks
1234567890123456
Contains:
FCC ID: OWS-NIC511-LTE, FCC ID:R17LE910NAV2 
IC: 5975A-NIC511LTE, IC: 5131A-LE910NAV2