User's Manual

MicroAP 5 Meter Labeling Product Requirements 1 March 2017 Silver Spring Networks 3
MicroAP 5 Meter Labeling Product Requirements 1 About MicroAP 5
Specifications
The hardware specifications for MicroAP 5 are listed in Table 1.
Table 1. MicroAP 5 specifications
Feature Description
900-MHz NAN Transceiver:
Frequency range 902-928 MHz North America
Data rate Up to 2.4 Mbps
Spread Spectrum technology Frequency Hopping
Transmitter output Up to 1W
Receiver sensitivity -98 dBm for 10% PER @ 100 kbps
2.4-GHz Communications:
Frequency range 2.4 GHz, ISM Band
Data rate Up to 2.4 Mbps
Spreading technique FHSS
Transmitter output Up to 500mW
Receiver sensitivity -94 dBm @ 10% PER
2.4-GHz HAN Transceiver:
Frequency range 2.4 GHz, ISM Band
Data rate 250 kbps
Spreading technique Direct Sequence
MAC/Channels 802.15.4/ 16
Transmitter output Up to 200mW
Receiver sensitivity -94 dBm @ 10% PER
NAN Network:
Addressing 8 byte MAC Address
Protocol UDP/IPv6
Confidentiality AES-256 Encryption
Authentication ECDSA & RSA Signatures
HAN Network:
Protocols ZigBee Pro
Device Types Network Coordinator/End Device
Profile SmartEnergy Profile 1.1
WAN Transceiver (NA1):
Frequency Ranges 4G Bands: B12/B17 (700), B5(850), B4(aws1700), B2 (1900)
3G Bands: B2 (1900), B5 (850)
Transmitter Output Up to 250 mW (per specification)
WAN Transceiver (SV1 Version):