User's Manual

NIC 510 and Meter Labeling Product Requirements 23 December 2015 Silver Spring Networks 4
NIC 510 and Meter Labeling Product Requirements 1 About the Silver Spring Networks Network Interface Card, NIC 510
NIC Address Labeling
For radio identification, the host device shall have an auxiliary label containing the Silver
Spring Networks NIC address presented in text (16 alphanumeric digits) and bar code
formats.
• Bar Code Type = Code 3 of 9
• Bar Code Font Size = unknown
• Font Type = unknown
• Font Size = unknown
• Bar Code Label Dimensions = 1.0ʺ x 1.5ʺ
• Bar Code Material Type = Static Dissipative Polyimide
Figure 2 shows an example of the NIC address label, which is consistent with FCC
requirements set forth in FCC and Industry Canada Guidelines for Devices Containing a
Transmitter Module on page 7, and contains the Silver Spring Networks corporate name and
NIC EUI-64 address.
NIC Labeling
The Silver Spring Networks meter NIC has two labels relevant to meter final assembly and
RMA: the FCC and Part Number label and the Silver Spring NIC address label. Both labels
are located on the bottom side of the NIC PCA.
The FCC ID label is 1ʺ x .375ʺ inches (2.5 x 1 cm).
Figure 3 shows an example of the FCC ID label found on the meter NIC.
Figure 2. Example of NIC address label for NIC510
Figure 3. Sample FCC ID label for meter NIC510
Silver Spring Networks
1234567890123456
Contains: 
FCC ID: OWS-NIC511-03 IC: 5975A-NIC51103