User Manual

4 Relay SG Product Guide
Safety Information
The label includes the data listed in Table 1:
Safety Information
WARNING!: Severe shock and explosion hazard! Touching energized parts can result in
massive equipment damage, and severe injury or death. Short-circuiting energized
parts will result in blinding flash and explosion. Opening and closing electrical circuits
can also produce dangerous and explosive arc flashes. Involuntary muscular reactions
associated with electrical shock may result in other injuries. Observe the following
safety guidelines.
Careful planning of every job is essential. Nothing should be taken for granted. Do not take
chances!
z Read and follow all approved policies and procedures provided by your employer associated
with the procedures in this manual.
z The procedures in this manual must only be performed by qualified workers in accordance
with local utility safety practices, utility requirements, and applicable OSHA and NFPA
standards.
z The information contained in this document is intended to aid qualified personnel, and is
not a replacement for the proper training required to make a person qualified.
z Silver Spring Networks assumes no liability for the customer’s failure to follow these safety
guidelines.
General Electrical Safety
z Perform the procedures in this manual in accordance with applicable workplace standards
established by the following agencies:
 Occupational Safety and Health Act (OSHA).
 The National Electrical Code published by the National Fire Protection Association
(NFPA-70).
Table 1. Relay SG Label Data
Label Element Label Text
Title RELAY, SG,NIC V5.0,BPF
Catalog Number 210-040101
FCC ID OWS-NIC502
Industry Canada ID 5975A-NIC502
Label Part Number 996-0000018C