User's Manual
Physical Specications
Parameter Value
Size 30x25x2.5mm
Weight 5g (approximately)
Package Type LGA – 72 pins
Material PCB Board
Parameter Conditions Value Unit
Supply voltage All supply pins must have the same voltage -0.3 to 3.6 V
Voltage on any digital pin - -0.3 to VDD+0.3, max 3.6 V
Input RF level - +10 dBm
VSWR limit At antenna port 10:1
Storage temperature range - -40 to +120 °C
Reow soldering temperature According to IPC/JEDEC J-STD-020 260 °C
ESD • Human Body Model
• Charged Device Model (RF pins)
• Charged Device Model (non-RF pins)
250
250
250
V
Recommended Operating Conditions
Parameter Conditions Min Max Unit
Ambient temperature range 0-95% RH -40 85 °C
Supply voltage - 3.1 3.6 V
Input voltage Do not exceed the absolute
maximum voltage
-0.3 VDD +0.3 V
Ripple - - 10 mV
Transient - - 20 mV
Electrical Specications
This section contains electrical specications for Milli 5.
Note: All specications are subject to change without notice.
Absolute Maximum Ratings: Under no circumstances must the absolute maximum ratings be violated.
Stress exceeding one or more of the limiting values may cause permanent damage to the device.