User's Manual

17
© 2010 Silver Spring Networks | Company Confidential
Attach IMU Assembly to Meter
• If you hear clicking or snapping, or if
there is a gap or a poor gasket seal,
remove the IMU and reinstall.
Repeat the verification checks.
• Attach the index cover and 2
screws to the meter and IMU as
shown. On a Rockwell meter, the
curved side of the index cover goes
on top. The red tamper plugs will fit
to the upper left and lower right
corners.
• Tighten the 2 screws.
Torque:
– Rockwell: 6-8 inch pounds
– American: 10-11 inch pounds