User's Manual

ManualsBrandsSilver Spring Networks ManualsElectronicsRF Module for Utility Gas Meter

8

9

12

© 2010 Silver Spring Networks | Company Confidential

Connect the Pulser to the IMU

• Make sure the 3 gel splices are to

the right of the cable tie.

• Tighten the cable tie. This

provides extra strain relief for the

cable.

• Trim the cable tie.

• Leave 1” of cable slack inside the

IMU, and pull the rest of the

cable out of the cable seal

connector.

• Tighten the cable seal connector.