User's Manual

11
© 2010 Silver Spring Networks | Company Confidential
Connect the Pulser to the IMU
•Thread the pulser cable through
the cable seal connector.
•Thread the pulser cable through
the tie wrap.
•Connect the 3 cables with the gel
splices.
– Do not strip the insulation from
the wires.
– Insert the wire pair (red and red,
black and black, white and
white) to be connected into a gel
splice; push all the way forward.
– Close the gel splice by squeezing
the gel splice with pliers.
– Repeat for the 3 pairs of wires