User's Manual
Table Of Contents
- FCC WARNING STATEMENT
- Note
- Preface……………………………………………………………………………………………………. iv
- Chapter 1 Theory of Operation…………………………………………………………………… 1-1
- Start the Field Service Application
- Install the Pulse Output Interface Device
- Setup the Radio for Communication through the Gateway
- Table 3-1 Troubleshooting the C&I Gas Meter Interface
- Table 3-2 Troubleshooting the Laptop Computer/Field Service Unit
Applicant: Silver Spring Networks, Inc. Gas Pulse Interface FCC ID:OWS-963
Preface_______________________________________________
Organization of Manual
This manual is divided in the following manner:
• “C&I Gas Meter Interface Theory and Installation”, provides information specific to the IMU end-point device.
• “Theory of Operation”, containing a basic overview of the Silver Spring Networks AxisPath
TM
network and how
the C&I Gas Meter Interface end-point device functions within the network.
• “Installation and Initialization”, containing step-by-step IMU end-point device installation and initialization
instructions.
• “Troubleshooting”, containing IMU-specific system troubleshooting information.
Document Conventions
This document uses a number of conventions designed to help communicate specific information. These conventions
include the following:
• Danger, Warning, and Caution:
DANGER!
Danger messages alert you to situations that will cause
personal injury or death if you do not follow the instructions
correctly.
WARNING!
Warnings alert you to situations that may potentially cause
personal injury or death if you do not follow the directions
correctly.
CAUTION
Cautions alert you to situations that may result in damage to
the hardware or software if you do not follow the
instructions correctly.