Installation Instructions

Install the Pulse Output Interface Device
For American/Sprague and Rockwell meters, interface with either the Pulsimatic pulse output
adapter or the RioTronics adapter.
• Install the Pulsimatic unit in line with the index register and upon installation of the unit,
replace the index register on top of the Pulsimatic.
• Install the RioTronics-enabled index register in place of the existing index register.
For Dresser Industries’ Roots meters, please follow the instructions for installation of the
RioTronics Interface module.
Install the Innovatec C&I Gas Meter Interface radio device to the surrounding structure which can
include the meter piping, meter fixtures/supports or some adjacent structure to the meter.
Connect the meter pulse output device to the C&I Gas Meter Interface by using the weather-
resistant cable assembly from the pulse output device.
Setup the Radio for Communication through the Gateway