User Instructions

Document Type: Test Procedure
Equipment Name: Innovatec C and I Electric
Author: Dithien V. Ho, RF Design Engineer.
Page 20 of 24
4.2.5. Disabling Alarm Transmit Function Test
Repeat step 4.2.1 and set “Alarm Active Mask” and “Alarm priority Mask” to 0:
Electric USN = UUT Serial Number
Set Alarm Active Mask = 00000000 (8)
Set Alarm Priority Mask = 00000000 (8)
Alarm Timer = 1 (Optional)
Alarm Channel = INITIAL CHANNEL (Same as Communications Channel)
4.2.5.1. Activate “Tamper” switch; observe for none alarm send message transmits.
4.2.5.2. Disconnect AC power; observe for none alarm send message transmits.
4.2.5.3. Reconnect AC powers; observe for none alarm send message transmits.
Pass__Fail___
FIGURE 13