User Instructions

Document Type: Test Procedure
Equipment Name: Innovatec C and I Electric
Author: Dithien V. Ho, RF Design Engineer.
Page 10 of 24
3.3.1. [Query Serial Number]
Select Query Serial Numbers and select “Transmit!”
Observer for the “Incoming Message”, make sure the FSU (Field Service Unit) are communicating with
the UUT, and reporting the correct serial number for attached Meter (Either Landis & Gyr, Vectron or
applicable Device)
FIGURE 3
METER S/N REPORTED: ______________________
C&I DEVICE S/N REPORTED: ______________________
Pass__Fail___