Instruction manual

5
INITIAL SET UP
1. Make sure the BulletHD is OFF before adding or removing the memory card!
2. Screw out the rear cap (open) located at the back of the BulletHD .
3. Install a micro SD memory card (max up to 32GB) into the rear slot. To insert the
micro SD card, slide the micro SD card into the card slot on the back of the
BulletHD with the card label facing down. The micro SD card will click into place
once it is inserted past flush with the Bullet HD. Use your fingernail to do this. Then
screw in the rear cap till is complete lock.
4. If no micro SD memory is inserted in the BulletHD, the LED on top of the camera
will blink red and blue.
5. When using a micro SD memory card in the BulletHD, there should be no data
from other devices on the card. If you are using a micro SD memory card for the
first time in the BulletHD, first you should format the card in your computer.
1080P 720P
F
BulletHD OVERVIEW
LED
USB
1080P / 720P Mode Switch Stabilizer / Firmware
MicroSD Card Slot Battery Microphone
Power / Shutter Rear Cap Mode Switch