Instruction Manual MANSECURE120 REV-A 23/07/13 Wide Angle Motion Activated Security Camera SILVAN AUSTRALIA PTY. LTD. ABN 48 099 851 144 VICTORIA (HEAD OFFICE) NEW ZEALAND 244- 264 Greens Rd, Dandenong South, 3175 Australia Telephone: +61 (03) 9215 2700 Facsimile: +61 (03) 9215 2701 www.silvan.com.au Te Rapa, Hamilton, 2001 New Zealand 22 Sunshine Avenue Telephone: +64 (07) 8496030 Fax: +64 (07) 8496070 www.silvannz.co.
New Product Warranty Silvan Warranty Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Table of Contents General Information 1.1 Introduction 1.2 Application 1.3 Illustration Quick Start 2.1 Load Batteries 2.2 Insert SD Card 2.3 Enter Test Mode 2.4 Enter Live Mode 2.4 Review Pictures or Video Advanced Settings 3.1 Parameter Settings 3.2 File Format Appendix Technical Specifications General Information 1.
1.
The camera provides the following connections for external devices: USB port, SD card slot, TV out jack, and external DC power in jack. The 3-way Power/Mode Switch is used to select the main operation modes: OFF, ON and TEST (Also called SET). Quick Start If you are not familiar with the operation of this camera, the following instructions will help you get a quick overview. Before doing any operation, please make sure you have loaded batteries and plugged the SD card correctly.
2.3 Enter Test mode Switch to the TEST position to enter the Test mode. In this mode you can take pictures or video clips like a regular digital camera, or enter the Menu to set up parameters. On the keypad there are four “shortcut” functional keys (see Figure 2-1) working as below: Figure 2.1 Press the key to set the camera to shoot video clips. Press the key to set the camera to take still pictures. Press the SHOT key to manually trigger the shutter.
2.5 Review Picture or Video There are two ways to review captured picture or video: 1) TV monitor (or a SD-card viewer with a TV-in jack) Connect the camera to a TV monitor with the supplied cable. Then enter the TEST mode. The last picture will be shown on the TV monitor after pressing the OK key. At any time pressing the OK key again will return to the TEST mode. 2) Computer (or a SD-card viewer with a USB port) Connect the camera to a PC with the supplied USB cable.
Parameter Date Stamp (affects still photos only) Timer Switch Settings (Bold = default) On, Off Off, On Password Set Off, On Serial No. Off, On Time Lapse Off, On Audio On,Off Default Set Description Select On if you want the date & time imprinted in every photo. Note: When Date/Time is additional details are recorded including Serial No. and temperature. Select On if you only want the camera to work within a specified time period every day.
Appendix: TECHNICAL SPECIFICATION Model Image Sensor Lens IR Flash LCD Screen Operation Keypad Memory Compatibility Picture Size (pixels) Video Size PIR (Motion) Sensitivity PIR Sensing Distance Central PIR Sensing angle Operation Mode Trigger Time Trigger Interval Photo Playback Zoom Time Stamp Timer Password Device Serial No.
