Owner`s manual

4 -- TrueMagnetic

Compass Function

Press the dedicated COMPASS button at any time to enter the electronic

Compass function.

The electronic compass detects the Earth’s magnetic field and displays a compass

bearing whether the GPS receiver is turned ON or OFF. This feature is not found on

standard GPS receivers.

The TrueMagnetic

compass function can appear differently if you have assigned a

*HOME* or designated a GOTO WAYPOINT as in section 7.7-1. Figure 11 has no

waypoint selected, only basic compass navigation is displayed.

1. A compass bearing, accurate to two degrees

will be displayed along with the cardinal

direction.

2. The segment points at either true or magnetic

North, depending on your settings.

Described later in section 7.1-7.

! If MAG is displayed in the lower left-hand

corner indicates compass pointing

toward magnetic North, otherwise the

segment is pointing at true North, as in

figure 11.

Compass function automatically exits to the GPS Navigation function after 2 minutes.

5 -- Waypoint Function

Press the dedicated WPT button to enter the Waypoint function.

Everything related to waypoints is easily accessed by pressing WPT. Press UP

or DOWN to scroll through saving, viewing, deleting, entering new waypoints

and managing routes in the Waypoint Menu. To leave the WPT function, press NO/ESC.

6 -- Interactive Neoprene Case

A protective case is included with the Multi-Navigator. Although the unit is waterproof

and durable, using the neoprene case will further help protect the unit from damage.

The unique design makes it possible to use the Multi-

Navigator without removing it from this case (Fig. 12)

To use interactive case:

! Peal the front cover from top.

! Swing cover around the back of the unit and re-

hook over the top.

! This will expose the screen through a flexible

window.

The Multi-Navigator is now ready to use.

Reverse steps to cover the screen.

The following section should give you a basic understanding of the 5 Main functions, the

Compass and Waypoint functions and simple navigation using the StraightHome feature.

Now, in the INSTRUCTIONS section, you will explore how to set, calibrate and use all of

the previously mentioned functions.

Figure 12

Figure 11