Owner`s manual

GOTO WAYPOINT

To select a waypoint to navigate towards press YES. Use UP and DOWN to scroll

through waypoints in alphabetical order starting with the waypoint last entered. Confirm

by pressing YES. GOTO NAV STARTED will be displayed, and Multi-Navigator will return

to POSITION function.

It is also possible to search by name. Press RIGHT. The first letter will flash. Use UP and

DOWN to select the appropriate letter. Press RIGHT to move to the next letter. When

desired waypoint is displayed press YES to confirm.

MAGNIPOINTER

The MagniPointer enables you to create a waypoint using the built-in TrueMagnetic

compass.

1. Press YES to enter the setting. The current compass direction will be displayed.

2. Orient the Multi-Navigator to the direction or known bearing of the desired waypoint

and press SET to store the bearing.

3. Use UP and DOWN, LEFT and RIGHT to set the estimated distance to the waypoint.

Press SET to store the distance.

4. Enter the desired waypoint name and press SET when complete.

Note! Use The MagniPointer only when you do not have positioning information for

the waypoint you want to create. It is always preferable and more accurate to

enter a waypoint by its coordinates from a map.

NEW WAYPOINT

Manually enter a new waypoint into memory using this setting.

1. Press YES to enter. Your last position is displayed.

2. Adjust the coordinate using the UP and DOWN, LEFT and RIGHT buttons.

3. When desired coordinate is displayed press SET to store position.

4. Adjust the altitude and press SET.

5. Enter the desired waypoint name and press SET when complete.

EDIT WAYPOINT

Press YES to edit any aspect of previously stored waypoints.

1. Press UP or DOWN to scroll through the waypoints to the waypoint you want to edit.

Direction indications will be displayed for each waypoint.

2. Press YES when desired waypoint is displayed.

3. Adjust the coordinate using the UP and DOWN, LEFT and RIGHT buttons.

4. When desired coordinate is displayed press SET to store position.

5. Adjust the altitude and press SET.

6. Enter the desired waypoint name and press SET when complete.

! If you do not want to change any of the options press SET to move to next option.

VIEW WAYPOINT

View information on the waypoints in memory by pressing YES.

1. Use UP and DOWN to scroll through stored waypoints.

2. Press RIGHT or LEFT to view bearing and distance to the waypoint, time and date

of creation and its altitude.

3. Press ESC to exit viewing.

DELETE WAYPOINT

This setting is used to delete a waypoint from the memory. Scroll through the waypoints

using UP and DOWN. Press YES to delete.

WARNING! A waypoint cannot be recalled once it has been deleted.