Owner`s manual

3. When *HOME* is selected in the StraightHome function, BACK

is displayed just above *HOME*. (Fig. 21) Bearing, distance,

course and speed will also be shown. Figure 21 indicates

*HOME* is straight in front of you.

You must be moving for course and speed to be displayed.

IMPORTANT! When a GOTO waypoint is selected press LEFT or

RIGHT to scroll between the selected GOTO

waypoint and *HOME*.

7.6-2 SETTINGS

There are six possible settings related to the GPS function.

Access the settings by pressing SET while in the GPS function. Scroll through the

settings, by pressing UP or DOWN.

GOTO WAYPOINT Setting

To select a waypoint to navigate towards press YES. Use UP and DOWN to scroll

through waypoints in alphabetical order starting with the waypoint last entered. Confirm

by pressing YES. GOTO NAV STARTED will be displayed, and Multi-Navigator will return

to GPS function.

It is also possible to search by name. Press RIGHT. The first letter will flash. Use UP and

DOWN to select the appropriate letter. Press RIGHT to move to the next letter. When

desired waypoint is displayed press YES to confirm.

ODOMETER / MAX SPD Setting

Press YES to display the maximum speed and total distance traveled recorded. To reset

these values press SET, and confirm by pressing YES. Press ESC / NO to exit.

CANCEL GOTO or DELETE *HOME* Setting

This function is available only when a GOTO waypoint or a *HOME* position has been

stored and no route is active. Press YES to delete *HOME* or cancel GOTO.

WARNING! *HOME* cannot be recovered once it has been deleted.

CANCEL ROUTE Setting

This function is available only when a route has been stored and activated. To

cancel the current route press SET. Reactivate the route or select a new route in the

Route menu, section 8.2.

GOTO LEG Setting

This function is available only when a route has been stored and activated, section

8.2. In this function it is possible to manually select a leg to travel towards. The display

will show the leg closest to your current position. If you wish to navigate using another

leg press scroll to the leg with UP and DOWN. When desired leg is displayed press SET.

MORE SETTINGS

Described in section 7.1.

7.7 -- COMPASS SIDE FUNCTIONS & SETTINGS

Press the dedicated COMPASS button in any other function to view the

TrueMagnetic compass. This internal electronic compass will provide

directions without moving. A standard GPS unit does not have this function,

and requires motion and excess battery usage for any directional navigation.

Figure 21