Owner`s manual

BARO HISTORY Setting (Fig. 17)
Press YES to display the pressure history.
1. The length of pressure history displayed.
2. The total change from the current pressure.
3. The pressure recorded at the length of time
indicated on top.
Press UP or DOWN to change the length of history
displayed ranging from 0 to 36 hours.
To exit press ESC.
BARO ALT CORR Setting
Press YES to adjust the Barometer / Altimeter correction value. Enter the known altitude
at your location for the barometer readings to be adjusted as if you were at sea level. Or
enter a reference altitude of 0 feet for a true air pressure to be shown.
For reference:
8 meters (25 feet) in altitude corresponds to a change of one 1 mbar (0.03 in Hg).
Average air pressure at sea level is 1013 mbar.
MORE SETTINGS
Described in section 7.1.
7.5 -- TIME / DATE SIDE FUNCTIONS & SETTINGS
7.5-1 SIDE FUNCTIONS
There are two side functions related to the TIME / DATE function (Fig. 18).
SUNSET Side Function
Displays the time of sunset at the present received position. To check the sunset of a
previously stored waypoint press SET to open the SELECT WAYPOINT option and YES to
confirm. Scroll through stored waypoints using UP and DOWN. Press YES to select the
desired waypoint. The SUNSET at that location will be displayed.
SUNRISE Side Function
Displays the time of the sunrise at the selected location. If no waypoint was selected in
the previous SUNSET side function, the sunrise time at your present position is shown. If
you want to check the sunrise at ay other stored waypoint follow procedure mentioned
above. Press RIGHT to return to the TIME / DATE function.
10
Figure 17
1.
2.
3.
SUNSET
Side Function
SUNRISE
Side Function
TIME / DATE
Main Function
Figure 18