Specifications

Page 5

SECTION III

OPERATION

3-1 ON/OFF SWITCH

3-2 When the FD-1011 and 1011D are operated from a 117VAC source, power will be applied to the FD-1011 only when the

front panel ON-OFF switch, which is combined with the VOLUME control on the 1011D, is turned ON. The front panel ON-

OFF switch on the FD-1011 may then he left in the ON position at all times. When operated from 13.8VDC, the front panel

ON-OFF switch must be actuated to turn the unit on and off.

3-3 DISPLAY

3-4 When the FD-1011 is turned on, and the 1011D is turned off, the FD-1011 display will indicate 25.500 MHz. This is a

normal indication. Remember, the FD1011 is a companion unit designed specifically for the 1011D Transceiver. When the

VFO frequency from the 1011D is injected into the FD-1011 via the interconnecting cable, the FD-1011 will read the

frequency to which the Model 1011D is tuned.