Use and Care Manual

1881 Trade Center Way, Naples, Florida 34109

239-593-7988 www.siltech-inc.com Fax 239-593-7983

SILTECH®

100% Acrylic Solid Surface Windowsill Products

CARE AND CLEANING

Congratulations! You are fortunate to have selected a Siltech®

Innovative Windowsill Product, made of 100% Acrylic Solid Surface.

Designer friendly, non-porous and stain resistant, Siltech® Innovative

Windowsill Products are far more superior to other materials. Our

windowsill products are ideal for areas subject to the hazards of moisture

and heavy wear. No special cleaning goods are needed to keep Siltech®

products looking beautiful day in and day out.

While Siltech® Innovative Windowsill Products are extremely tough and

durable, like any other fine material they can be damaged if abused or

mistreated. Reviewing these Care and Cleaning instructions will assist

you in understanding how easy it is to care for your new Siltech® Acrylic

Solid Surface Product and how you can prevent more severe damage

that may require special repairs. With a little knowledge, you can enjoy the

elegance and beauty of Siltech® Innovative Windowsill Products for

years to come.

Normal Cleaning

Siltech® products are non-porous, so they can be wiped clean with a

damp cloth or sponge and mild detergents or general purpose cleaners

such as Mr. Clean®. Siltech® products come in a matte finish. Abrasive

cleaners like Ajax ® or Comet® may also be used. Periodically it may also

be helpful to go over the entire surface in a circular motion with an

abrasive cleaner or wet Scotch Brite® pad to maintain a uniform

appearance.

PAGE 1
SILTECH® 100% Acrylic Solid Surface Windowsill Products CARE AND CLEANING Congratulations! You are fortunate to have selected a Siltech® Innovative Windowsill Product, made of 100% Acrylic Solid Surface. Designer friendly, non-porous and stain resistant, Siltech® Innovative Windowsill Products are far more superior to other materials. Our windowsill products are ideal for areas subject to the hazards of moisture and heavy wear.
PAGE 2
Simple Precautions Do not place anything hot on a Siltech® product surface. Even though our Siltech® products can withstand sustained temperatures up to 225º F, prolonged or extreme heat could cause yellowing. Although minor cuts and scratches on a Siltech® solid surface product can be repaired, deep cuts will require the services of a certified professional. Strong acids such as those found in drain, toilet bowl, and oven cleaners should be used cautiously around Siltech® products.