Use and Care Manual

1881 Trade Center Way, Naples, Florida 34109
239-593-7988 www.siltech-inc.com Fax [phone]
Simple Precautions
Do not place anything hot on a Siltech® product surface. Even though our
Siltech® products can withstand sustained temperatures up to 225º F,
prolonged or extreme heat could cause yellowing.
Although minor cuts and scratches on a Siltech® solid surface product
can be repaired, deep cuts will require the services of a certified
professional.
Strong acids such as those found in drain, toilet bowl, and oven cleaners
should be used cautiously around Siltech® products. If these items are
accidentally spilled, wipe them up at once. Some of these items, when left
on the surface, may cause whitening, which can be difficult to remove.
Spills and Stains
While most everyday spills can be removed with the cleaning techniques
listed, some troublesome spills and stains such as food dye; tea and fruit
drinks may require more aggressive cleaning. These items can be
removed with full strength bleach followed by a general cleanser. Even
tougher stains, such as paint or permanent marker, can be removed with
denatured alcohol or lacquer thinner. Note: Bleach should only come in
contact with the surface for two to five minutes. Matte finish can be
scrubbed with an abrasive cleaner. Even nail polish can be removed
with nail polish remover or an abrasive cleaner.
Cigarettes
While Siltech® products won’t burn, should a lit cigarette accidentally
come in contact with the surface, it could leave a nicotine stain or scorch
mark. Either of these can be removed by cleaning with an abrasive
cleanser or buffing in a circular motion with a Scotch Brite® pad.
Repairing Scratches
For removing superficial scratches, rub in a circular motion with a wet
#7448 Scotch Brite® pad until the scratches are removed. Clean
thoroughly with soap and water and let dry. Note: Deep scratches can be
removed by carefully sanding lightly with 120 grit sandpaper followed
by 220 and 320 grit sandpaper. Then rub the surface with a wet #7448
Scotch Brite® pad in a circular motion to restore the finish.