SL-760A USE Color Sheet fed Scanner User’s Manual All rights reserved No part of this publication can be reproduced, transmitted, transcribed stored in retrieval system or translated into any language in any form by any means without the prior written consent of owners. Information im this manual is subject to change without notice and does mot represent a commitment on the part of the vendor. All product names are copyright, trademarks or trade names of their respective owners.
Overview This booklet provides a brief summary information that will familiarize you with the USB color scanner to get you up and running quickly. « A first look at the system. « Basic information you need to know before you operate the system for the first time. « An introduction of setting up and operating the system.
Installation Hardware 1.1 Insert the paper holder into the top slot of the scanner. 1.2 Connect the USB cable from PC system to the scanner USB port.
Getting Started Once you have done your set up that is not yet to scan. If you are ready to scan image into your computer that you have to read the following instructions carefully. Installing your scanner Insert the Application software CD into the CD-ROM Drive. + Following the instructions om-screen to complete software installation. « Plug the USB cable into the scanner front computer's USB port when the software instructs you to set up scanned installation.
Troubleshooting Tip SCANNER NOT FOUND « Check USB is detected. + Check the USB cable is properly plugged in. + Make sure the scanner service panel is firmly closed. PAPER JAM » Open the front of service panel and carefully remove the paper. + Close the scanner service panel until you hear a “ Click “, which indicates the service panel is closed securely.
SCANNER SPECIFICATION Scanner type Resolution Scanning Modes Max. Scan Size Min. Scan Size Scanning Speed Interface Dimension Weight Power Requirements Power consumption Operating Temperature Storage Temperature Operating Humidity Storage Humidity Motor jam release Paper thickness Driver Support EMC Safety Portable Color Sheet fed Scanner. Horizontal Vertical 300dpi 600dpi bit color 256 gray scale { 8-bit gray scale ) B&W text mode { binary ) 8.57 3.5” (W) x 2.
PAPER BECOMES SKEWED IN THE SCANNER 1. Inspect the service panel is properly closed. 2. Inspect the feeder (Rubber Roller) if there are any ink, toner or foreign particles on. If yes, please remove them. 3. F-low the maintenance tip procedure for feeder.
Maintenance Tip To assure the maximum image quality and performance of the scanner, please always keep your scanner in good conditions. In case of the feeder { Rubber Roller | has dirty particles, ink or paper «ratings, which you need to chainsaw °t to ensure the scans: image lit. ES 1. Open the service panel of the scanner. Inspect the condition of the rubber roller if there are dirt. 2.
Open the USB Dialog box to configure to get image output Welcome la Venus HSE Scanner Setting Sometimes you may want to’ change the setting on your scanned image. For example, if the image quality of the document is too dark or too bright then you may create a more visible image by setting adjustment. Click the S€ in USB dialog box then pop up a Enhance dialog box that you will be able to customize the scanned image to meet your specification.
Software Set up Win/ OSCAR Version. { Note: Use OSCAR setup ) After the setup is completed successfully “2en execute the VSBUPP.EXE file on OSCAR CD Pack. 2.10 2.11 2.12 Double click to select Add NeW Hardware in the Control Panel. “ Add New Hardware Wizard “dialog box appears and click next Select “ No “ then click next]. Select “ ? other device “ and double click it. Select “ Standard USB Host Controller” and “USB Root Hub” then click next. Click finish. Switch back to Control Panel.
What you will need in your PC system Ensure your PC system to meet the follow requirements, before you install your new scanner. Hardware and software requirements : ¢ IBM PC or IBM PC compatible with Pentium USB port support under Win95/0SR2 version or Win 98. + 90MB Hard Disk free space at least. + 32MB RAM memory or higher (64MB Recommended). + Display SAGA.
Warning Updating or revising this manual or making any changes to the information herein will be initiated when the company deems it necessary. The company reserves the right to take the above mentioned actions and is under no obligation to notify any person of such actions in advance or afterwards.
OBIT Dp) FEDERAL COMMUNICATIONS COMMISSION NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
