pen Eye ® Optix Pro-Pack Dome Camera User Manual model no. CM-525P Please carefully read these instructions before using this product. Save this manual for future use.
Manual Edition 27104AF - MAY 2007 ©2000 - 2007, OPENEYE INC Corporation All Rights Reserved. OPTIX® High Speed Dome Camera User Guide No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose. OPENEYE shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND.
WARNINGS & CAUTIONS WARNINGS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. - DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. - DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTIONS CAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
COMPLIANCE STATEMENT FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
IMPORTANT SAFEGUARDS 1. Do not expose the camera to rain or moisture - 7. Before operating, please check proper The OPTIX camera itself is designed for enclosed temperature, humidity and power source ratings - use or for use in a location where it is protected from -Use the camera under conditions where temperature rain and moisture. When exposed to moisture, turn is between 0C - 45C and humidity is below 60%.
27104AF 7
TABLE OF CONTENTS WARNINGS & CAUTIONS 4 COMPLIANCE STATEMENT 5 CE COMPLIANCE STATEMENT IMPORTANT SAFEGURDS 6 INTRODUCTION 10 INSTALLATION & CONFIGURATION 12 PROGRAM & OPERATION 21 PTZ SETUP MENU 24 TECHNICAL SPECIFICATIONS 47 DIMENSIONS 48 APPENDIX A-TROUBLE SHOOTING 49 APPENDIX B-OPTIONAL ITEMS 50 8 27104AF
27104AF 9
1. INTRODUCTION Features This OpenEye OPTIX Pro-Pack Dome Camera is the building block for any surveillance/security system. By using multiple Pre-Packaged dome cameras, no place is too large for monitoring. Extensive and flexible architecture facilitates remote control functions for a variety of external switching devices such as multiplexers and DVRs. A.
27104AF 11
2. INSTALLATION / CONFIGURATION 2.1 Basic Installation A. PACKAGE CONTENTS Qty OPTIX Pre-Pack Dome (Dome Camera Unit) Ceiling Mount Bracket Joint Pipe Plastic Anchor 1 1 1 4 4 1 1 1 Screws for Plastic Anchor L-Wrench (M4) L-Wrench (M5) Block Protector Cap Cable (Alarm In/Out) 2 1 Instruction Manual Silicon Rubber Sealant 1 1 Teflon Tape B.
2. INSTALLATION / CONFIGURATION C.
2. INSTALLATION / CONFIGURATION The Pro-Pack dome camera must be installed by qualified service personnel in accordance with all local and federaI electrical and building codes. The system should be installed according to Figures 3 through 9. ! The Pro-Pack OPTIX dome camera is for use in surface mounting applications. The mounting surface should be capable of supporting loads up to 10lb(4.5Kg).
2. INSTALLATION / CONFIGURATION The Pro-Pack dome camera must be installed by qualified service personnel in accordance with all local and federaI electrical and building codes. The system should be installed according to Figures 3 through 9. Figure 5 - Layout of Switches D. SETTING UP THE UNIT FOR TERMINATION The device which is connected at end of line, whether it be a dome camera or keyboard controller, must have the cable for communication terminated by setting the appropriate DIP switch.
2. INSTALLATION / CONFIGURATION The dome camera must be installed by qualified service personnel in accordance with all local and federaI electrical and building codes. The system should be installed according to Figures 3 through 9. Figure 7 - Example Termination Diagram E. SETTING THE CAMERA ADDRESS (ID) To prevent damage, each dome camera must have a unique address (ID).
2. INSTALLATION / CONFIGURATION F. SETTING UP THE DIP SWITCH If a dome camera is to be installed with an OPTIX dome keyboard controller, select the OpenEye OPTIX Protocol. Consult OpenEye technical support if a dome camera is installed with a device other than a keyboard.
2. INSTALLATION / CONFIGURATION 2.2 Connecting Wiring A. CONNECTING RS-485/422 The dome camera can be controlled remotely by an externaI device or control system, such as control keyboard, using RS-485 half duplex, RS-422 duplex or simplex serial communications signaIs. Connect marked RX+, RX- to TX+ and TX- of the RS-485 control system. If control system is RS-422, connect TX+(TRX+), TX-(TRX-) of the dome camera to TX+, TX- and RX+, RX- of the control device respectively. B.
2. INSTALLATION / CONFIGURATION 2.3 Getting Started Once installed, apply power to the dome camera. Once power is turned on, the dome camera will start a configuration sequence. When configuration is done, the following information is displayed. LOADING DOME ADDRESS (001) OPTIX DOME 1 CHECKING EEP ROM CAMERA TYPE: 25XDN INIT. CAMERA (OK) COMM.
27104AF
3. PROGRAM & OPERATION 3.1 Getting Started Before you program or operate OpenEye OPTIX Dome Camera, you must select the dome camera by pressing the dome camera NO + CAM on the OpenEye Keyboard Controller. Example: Pressing 1, 0 and CAM key sequentally will select the dome camera 10. The selected dome camera ID will be displayed on the LCD monitor of the OpenEye Keyboard Controller. 3.2 Accessing On-Screen Menu Utility A.
3. PROGRAM & OPERATION A.
27104AF 23
4. PTZ SETUP MENU 4.1 HOME After a dome control menu item has been selected, follow the directions below to set the function.
4. PTZ SETUP MENU 4.2 SYS INFO The OpenEye OPTIX Camera’s set up menu provides essentiaI information about the dome camera if service is required. When you view this screen, you can determine the camera type and ROM version. The information on this screen can't be modified. SYSTEM INFORMATION --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT ------------------------------------------------------------------ CAMERA TYPE : 25XD / NTSC H/W VERSION : VI.
4. PTZ SETUP MENU 4.3 DISPLAY A. AREA TITLE If this option is enabled, the nearest area title will be displayed when the camera is moving either by manual operation, AutoScan, or Pattern. The DOME camera’s [OSD DISPLAY/AREA TITLE] will override this function (Dome Camera’s[OSD DISPLAY/AREA TITLE] must be turned ON). --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT AREA TITLE PRIVACY ZONE OSD DISPLAY VIEW ANGLE POSITION COOLER/HEATER AREA TITLE SET UP NO.
4. PTZ SETUP MENU B. PRIVACY ZONE The Privacy Zone allows users to hide up to 8 unwanted views in a camera. 1 Select No. --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT AREA TITLE PRIVACY ZONE OSD DISPLAY VIEW ANGLE POSITION COOLER/HEATER PRIVACY ZONE SETUP NO.001 : MODE : DISABLE 12345678 00 ======== SAVE EXIT C. ON SCREEN DISPLAY (OSD) Note: ALL displays or titles will disappeared when you set all flags OFF.
4. PTZ SETUP MENU 1 AREA D. TIME :005 OPERATION 3 2 11 10 9 C H 4 T1 001 P F T :+34.0C 5 28 D Z050 ID :0001 (259.38, 047.42) 6 8 7 1 Area/P-Zone Title: You can see the area title, the privacy zone title has priority over the area title. 2 Time Display: D. Time/T.Time/A.
4. PTZ SETUP MENU D. VIEW ANGLE Note: When the dome camera is installed near a wall, panning range can be programmed by users.
F. COOLER/HEATER This function will allow users to keep the inside temperature of the OpenEye OPTIX Pre-Pack at a stable operating condition. If the temperature in the dome is to high, the cameras Auto Mode will regulate the temperature by turning on the Cooler. On the contrary, the heater will make the inside temperature getting higher if the unit is cold.
4.4 DOME SETUP A. HOME/PRESET If you need to view specific places routinely, program presets is an ideal function. A preset is a programmed video scene with automatic pan, tilt, zoom, focus and iris settings. Once programmed, enter the number and press a preset button on your controller to automatically call up the preset. In addition, presets can be assigned to alarm actions or as the “home” position for the dome camera.
4. PTZ SETUP MENU 3 Focus & Iris: Auto/Manual 4 Dwell Time: 05~240 sec. 5 Pan/Tilt/Zoom HOME/PRESET SETUP NO. 001 FOCUS IRIS DWELL(SEC) :PRESET : AUTO P: 000.00 : AUTO T: 000.00 : 005 Z: 001 0123456789 0123456789 00 = = = = = = = = 01 = = = = = = = = 02 = = = = = = = = 03 = = = = = = = = 04 = = = = = = = = 05 = = = = = = = = 06 = = = = = = = = 07 = = = = = = = = SAVE EXIT HOME/PRESET SETUP NO. 001 FOCUS IRIS DWELL(SEC) :PRESET : AUTO P: 033.39 : AUTO T: 050.
4. PTZ SETUP MENU 9 Cauton ! If you use quick preset setup, it will overwrite the previous preset. OVERWRITE? YES: HOME/ENT NO: CLR WRITING O.K. Z001ID: 0010 (145.95, 038.60) F F Z001ID: 0010 (145.95, 038.60) B. AUTO SCAN The AUTO SCAN supports up to 8 programmed angles at user-programmable speeds. Follow the steps below to program the AutoScan function. 1 Select No.
4. PTZ SETUP MENU 3 Mode AUTOSCAN SETUP NO. 001 MODE SPEED(PTZ) START(PTZ) END (PTZ) DWELL(SEC) FOCUS/IRIS : : ENDLESS (LEFT) :1 : (000.0, 000.00, 001) : : 005 : AUTO 0123456789 00 = = = = = = = = SAVE EXIT AUTOSCAN SETUP NO. 001 MODE SPEED(PTZ) START(PTZ) END (PTZ) DWELL(SEC) FOCUS/IRIS : : COMING & GOING :1 : (000.0, 000.00, 001) : (000.0, 000.00, 00) : 005 : AUTO 0123456789 00 = = = = = = = = SAVE EXIT a. Endless (Left): 360 degree endless scan from the left b.
4. PTZ SETUP MENU C. TOUR 1 Select No. --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT HOME/PRESET AUTO SCAN TOUR PATTERN NO.
4. PTZ SETUP MENU 5 Mode & No. Select between 4 different modes and No. (Preset, Auto Scan, Tour and Pattern) TOUR SETUP : : FAST : OFF NO. 001 SPEED FREEZE === === === === === === === === === === === === === === === === === === SAVE EXIT === === === === === === === === === === === === === === === === === === NO.
4. PTZ SETUP MENU D. PATTERN The pattern feature records a users control of the selected dome camera for up to 240 seconds. Up to four patterns can be stored and played back by pressing No. + PTRN keys subsequently on your OpenEye Keyboard controller. 1 --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT 2 HOME/PRESET AUTO SCAN TOUR PATTERN PATTERN SETUP TIME 000 000 000 000 NO.
4. PTZ SETUP MENU 4.6 ALARMS NO. Alarm Input 1 --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT 2 ALARM SETUP NO.
4. PTZ SETUP MENU 4.7 CAMERAS Note: This menu feature will depend on the camera module installed in your dome camera. A. FOCUS --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT FOCUS WB CONTROL AE CONTROL LINE LOCK SCREEN SETUP DIGITAL EFFECT DAY & NIGHT FOCUS SETUP MODE AUTO SAVE EXIT SAVE EXIT MODE: AUTO / MANUAL: Use AUTO mode in normal use. B.
4. PTZ SETUP MENU C. AE CONTROL --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT FOCUS WB CONTROL AE CONTROL LINE LOCK SCREEN SETUP DIGITAL EFFECT DAY & NIGHT WHITE BALANCE SETUP MODE : FULL AUTO IRIS : GAIN (AGC) : SHUTTER SPEED : SLOW SHUTTER : OFF SAVE EXIT MODE: FULL AUTO/ SHUTTER FIX/ IRIS FIX/ AGC FIX/ MANUAL IRIS: CLOSE/ F22/ F19/ F16/ FU/ F11/ F9.6/ F8.L0/ F6.8/ F5.6/ F4.8/ F4.0/ F3.4/ F2.8/ F2.4/ F1.6/ AUTO GAIN: AUTO /OFF/ 8dB/ 10dB ...
4. PTZ SETUP MENU E. SCREEN SETUP --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT FOCUS WB CONTROL AE CONTROL LINE LOCK SCREEN SETUP DIGITAL EFFECT DAY & NIGHT SCREEN SETUP BRIGHTNESS : 08 SHARPNESS : 08 BACK LIGHT : AUTO BMB MODE : OFF BMB LEVEL :7 SAVE EXIT BRIGHTNESS: You can adjust the camera BRIGHTNESS using this mode.
4. PTZ SETUP MENU G. DAY & NIGHT --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT DAY & NIGHT SETUP MODE FOCUS WB CONTROL AE CONTROL LINE LOCK SCREEN SETUP DIGITAL EFFECT DAY & NIGHT : AUTO SAVE EXIT The Day/Night option removes the IR cut filter on the camera and makes the camera sensitive to near infrared. When Day/Night is ON, the color model changes to B&W mode automatically. The operator can enable Day/Night for all dome cameras at the same time.
4. PTZ SETUP MENU 4.8 CONFIG A. INIT DATA 1 --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT INIT DATA DOME RESET GENERAL ON/OFF INIT DATA SETUP INIT. ALL(FACTORY) : OFF INIT. CAMERA : OFF INIT. AREA TITLE : OFF INIT. PRIVACY ZONE : OFF INIT. PRESET : OFF INIT. TOUR : OFF INIT. PATTERN : OFF INIT. SCAN :OFF SAVE EXIT INIT DATA SETUP INIT. ALL(FACTORY) INIT. CAMERA INIT. AREA TITLE CONTINUE? INIT. PRIVACY ZONE YES: HOME/ENT INIT.
4. PTZ SETUP MENU B. DOME RESET --- OpenEye OPTIX PRE-PACK --HOME SYS INFO DISPLAY DOME SETUP ALARMS CAMERA CONFIG LANGUAGE EXIT INIT DATA DOME RESET GENERAL RESET: (HOME)OR(ENT) KEY CANCEL: (CLR/ESC) KEY This feature is used to reset the micro processor of the dome camera. The main power will be turned OFF and then ON again during this process. C.
4. PTZ SETUP MENU 4.9 EXIT 1. To exit the main menu, select the CLR / ESC key or select the MENU / LOCK button. 2.
27104AF
5. TECHNICAL SPECIFICATIONS Camera: CM-525P 1.0 lx (30IRE); Day & Night Off (Color) 0.1 lx (30IRE); Day & Night On (B&W) 0.01 lx; Slow Shutter X 128 On 0.001 lx (30IRE); Day&Night On (B&W)+ DSS 25X Optical Zoom with Auto Focus (10X Digital Zoom (F = 1.6~3.7, 50IRE, 3.8mm~95mm) 50 dB 0.
6. DIMENSIONS 7.2” [182] 4.5” [114.5] 6.7” [170] 10.8” [273.8] OpenEye OPTIX Pro-Pack Dome Camera 4.9” [124] mm mm 1-1/4” PT-Thread 4.9” [124] 4- o 4.3”[11] .71” [18] 7.9” [200] .71” [18] 1-1/4” NPT PIPE Thread 5.9” [150] 1.14” [29] 1-1/4” PT-Thread 1.
APPENDIX A - TROUBLESHOOTING If problems occur, verify the installation of the camera with the instructions in the manual and with other operating equipment. Isolate the problem to specific pieces of equipment in the system and refer to the equipment manual for further information. Problem Solution No Video Verify that power is connected to all pieces of equipment in the system. Verify that the power switches are in the “ON” position. Poor Video Quality Check the video connections.
APPENDIX B - OPTIONAL ITEMS A. PARAPET WALL (SWING ARM) & MOUNT BRACKET 21.99” [558] 4.47” [120] 39.4” [1000] 2-m10Xp1.5-BOLT .59” [15] 2.76” [70] 2.76” [70] 14.2” [360] 2.76” [70] 2.76” [70] 4-M10Xp1.5-NUT 1.58” [40] 8.67” [220] 1.18” [30] 11.03” [280] 3.31” [84] B. PARAPET ROOF TOP MOUNT BRACKET 21.99 [558] 4.73” [120] 39.4” [1000] 14.38 [365] 11.03” [280] 14.18” [360] C. INDOOR / OUTDOOR HOUSING 1-1/4” NPT Thread 4.89” [124] 1.5” NPT PIPE 4.89” [124] 4-o.43” 9.85” 1-1/4” NPT PIPE 5.
APPENDIX B - OPTIONAL ITEMS D. CORNER MOUNT ADAPTOR 7.88” [200] 3.94” [100] 6.3”160.0 [160] 4-M8X1.25 NUT 6.51” [165.1] o1.58” [40] 4.33” [110] 8.27” [210] 4.5”114.3 [114.3] o.433” [11] 5.01” [150] E. ROOF MOUNT ADAPTOR 6.3” [160] 4.5” [114.3] 12.61” [320] 6.51” [165.1] 8.27” [210] 12.61” [320] o1.58 [40] 4-M8X1.25NUT F. POLE MOUNT ADAPTOR 2.56” [65] 7.1” [180] 27104AF 8.27” [210] 2-o 1.58” [40] 6.51” [165.1] 4.5” [114.
APPENDIX B - OPTIONAL ITEMS G. FLUSH MOUNT ADAPTOR 7.8” [200] 4.73” [120] 3.15” [80] 8.67” [220] H: WALL MOUNT ADAPTOR 11.74” [298] 4.5” [8] 1.58” [40] 8” [203] 4.5” [114.3] 3.15” [80] 8” [203] 6.51” [165.1] .37” [9.5] 6” [152.4] 52 .
27104AF 53
27104AF
27104AF 55
pen Eye ® PRODUCT SERVICE OpenEye website: http://www.openeye.net Call 1-888-542-1103 for questions or comments regarding your OpenEye OPTIX camera or accessories. SHIPPING YOUR OPTIX CAMERA Make sure to carefully package your OPTIX Dome Camera or Accessories when shipping, preferably in the original packaging. Send the unit to an authorized dealer / service center, prepaid and adequately insured. Do not send the unit to the OpenEye headquarters address listed below. OpenEye Inc. 165 S. Pine St.
