Reference Manual

RS9116 n-Link Linux and Android Technical Reference Manual
Version 2.0
August 2019
44
Default Value NULL Data
Input Parameters VAP Name (string like wifi0, wifi1, etc.)
Integer value - 0 or 1
0 – Inform Access Point that the module is going to be in power
save mode.
1 – De authenticate from the previous Access Point during
Roaming.
Output Parameter None
Reset Required No
Usage iwpriv <vap_name> setparam 12 The value 12 is used for setting
Roaming related parameters
for the setparam command. <value>
Example The command below sends de authentication during roaming.
iwpriv wifi0 setparam 12 1
Set Keep Alive Period
Description This command is used to set the Keep Alive period in the n-Link®
Module.
Default Value 90 seconds
Input Parameters VAP Name (string like wifi0, wifi1, etc.)
Integer value ranges between 15 and 12000 (seconds)
Output Parameter None
Reset Required No
Usage # iwpriv <vap_name> keep_alive <value>
Example The command given below sets the Keep Alive period to 100
seconds:
# iwpriv wifi0 keep_alive 100
Table 4: iwpriv Usage for Client Mode
5.5 Configuring Using onebox_util
The "onebox_util" program is provided to configure the n-Link® module for parameters which are not specific to a
virtual interface (VAP). The table below describes the usage of the "onebox_util" command for setting and getting
the parameters.