User's Manual

7
Version with cable holder Version without cable holder
4. Hang the JuiceBox onto the wall bracket.
NOTE
If the JuiceBox does not hang securely, adjust the screws that were installed in step
3. The 48 and 80 amp are hardwire only and do not have a plug as shown.
NOTE
The hardwire versions of the JuiceBox are shipped with appropriate wires that
meet the National Electric Code (NEC) NFPA 70 and require a nearby junction box
connection. Any alteration of the supplied wiring will invalidate the warranty and may
not conform to NEC.
5. Connect the JuiceBox:
> Plug-In Version: Plug the JuiceBox into the NEMA 14-50 outlet or NEMA 6-50 outlet.
> 1-Phase Hardwired Version: Connect the harness to the wiring terminal.
WARNING
It is the installers responsibility to ensure that the JuiceBox is wired in accordance
with the local electrical code.