User's Manual

5
32A 40A 48A 80A
CIRCUIT
REQUIREMENTS
40 Amp
2 pole breaker
50 Amp
2 pole breaker
60 Amp
2 pole breaker
100 Amp
2 pole breaker
RECOMMEND
WIRING
#8AWG or
larger gauge
copper
wires for the
conductors
(NEC 625.17(A)
(2)
#6AWG or
larger gauge
copper
wires for the
conductors
(NEC 625.17(A)
(2)
#4AWG or
larger gauge
copper
wires for the
conductors
(NEC 625.17(A)
(2)
#2 or 3AWG
or larger
gauge copper
wires for the
conductors
(NEC 625.17(A)
(2)
#10AWG
Green or bare
copper for
the ground
conductor (no
NEU)
#10AWG
Green or bare
copper for
the ground
conductor (no
NEUTRAL is
used)
#8AWG Green
or bare copper
for the ground
conductor (no
NEU)
#6AWG Green
or bare copper
for the ground
conductor (no
NEU)
WARNING
Do not continue this installation until the circuit breaker is turned o.
WIRING AND CIRCUIT REQUIREMENTS
For additional specications, refer to the Specications section.
Installation
Fully read and understand the directions before installation. Refer to impoant safety
information at the end of this document.
This section describes installing the JuiceBox Pro onto a wall mount. If installing onto a
JuiceStand, refer to the JuiceStand Manual.
1. Turn o the circuit breaker to the NEMA 14-50 outlet, NEMA 6-50 outlet, or hardwired
electrical connection.
2. Use a stud sensor to determine an appropriate mounting location, then use the 2 screws
to secure the wall bracket.