Data Sheet
Table Of Contents
- 1. Feature List
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Characteristics
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption with 3 V Supply
- 4.4 Radio Current Consumption with 3 V Supply
- 4.5 RF Transmitter General Characteristics for the 2.4 GHz Band
- 4.6 RF Receiver General Characteristics for the 2.4 GHz Band
- 4.7 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 1 Mbps Data Rate
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 2 Mbps Data Rate
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 500 kbps Data Rate
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 125 kbps Data Rate
- 4.11 High-Frequency Crystal
- 4.12 Low-Frequency Crystal
- 4.13 Precision Low Frequency RC Oscillator (LFRCO)
- 4.14 GPIO Pins
- 4.15 Microcontroller Peripherals
- 4.16 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
Confidential
1. Feature List
• Supported Protocols
• Bluetooth Low Energy (Bluetooth 5.2)
• Direction finding
• 1M, 2M and LE Coded PHYs
• Bluetooth mesh Low Power Node
• Wireless System-on-Chip
• 2.4 GHz radio
• TX power up to +8 dBm
•
High-performance 32-bit ARM Cortex-M33
®
with DSP in-
struction and floating-point unit for efficient signal process-
ing
• 512 kB flash program memory
• 32 kB RAM data memory
• Embedded Trace Macrocell (ETM) for advanced debugging
• High-Receiver Performance
• -106.7 dBm sensitivity (0.1% BER) at 125 kbps GFSK
• -102.5 dBm sensitivity (0.1% BER) at 500 kbps GFSK
• -98.9 dBm sensitivity (0.1% BER) at 1 Mbps GFSK
• -96.2 dBm sensitivity (0.1% BER) at 2 Mbps GFSK
• Low-Energy Consumption
• 4.3 mA RX current at 1 Mbps GFSK
• 4.8 mA TX current at 0 dBm output power
• 10.8 mA TX current at 8 dBm output power
• 26 µA/MHz in Active Mode (EM0)
• 1.40 μA EM2 DeepSleep current (RTCC running from
LFXO, Full RAM retention)
•
Regulatory Certifications
1
• FCC
• CE
• IC/ISEDC
• MIC/TELEC
• KCC
• Wide Operating Range
• 1.8 to 3.8 V
• -40 to +105°C
• Dimensions
• 12.9 mm x 15.0 mm x 2.2 mm
• Security Features
• Secure Boot with Root of Trust and Secure Loader (RTSL)
• Hardware Cryptographic Acceleration for AES128/256,
SHA-1, SHA-2 (up to 256-bit), ECC (up to 256-bit), ECDSA,
and ECDH
• True Random Number Generator (TRNG) compliant with
NIST SP800-90 and AIS-31
•
ARM
®
TrustZone
®
• Secure Debug with lock/unlock
• Wide Selection of MCU Peripherals
• 12-bit 1 Msps SAR Analog to Digital Converter (ADC)
• Up to 25 General Purpose I/O pins with output state reten-
tion and asynchronous interrupts
• 8 Channel DMA Controller
• 12 Channel Peripheral Reflex System (PRS)
• 4 × 16-bit Timer/Counter with 3 Compare/Capture/PWM
channels
• 1 × 32-bit Timer/Counter with 3 Compare/Capture/PWM
channels
• 32-bit Real Time Counter
• 24-bit Low Energy Timer for waveform generation
• 1 × Watchdog Timer
• 2 × Universal Synchronous/Asynchronous Receiver/Trans-
mitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I
2
S)
• 1 × Enhanced Universal Asynchronous Receiver/Transmit-
ter (EUART)
•
2 × I
2
C interface with SMBus support
• Digital microphone interface (PDM)
• RFSENSE with selective OOK mode
1. Available at the BGM220P Full-Production release.
BGM220P Wireless Gecko Bluetooth Module Data Sheet
Feature List
silabs.com | Building a more connected world. Preliminary Rev. 0.5 | 2