Data Sheet
Table Of Contents
- 1. Feature List
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Characteristics
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption with 3 V Supply
- 4.4 Radio Current Consumption with 3 V Supply
- 4.5 RF Transmitter General Characteristics for the 2.4 GHz Band
- 4.6 RF Receiver General Characteristics for the 2.4 GHz Band
- 4.7 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 1 Mbps Data Rate
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 2 Mbps Data Rate
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 500 kbps Data Rate
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 125 kbps Data Rate
- 4.11 High-Frequency Crystal
- 4.12 Low-Frequency Crystal
- 4.13 Precision Low Frequency RC Oscillator (LFRCO)
- 4.14 GPIO Pins
- 4.15 Microcontroller Peripherals
- 4.16 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
Confidential
4.5 RF Transmitter General Characteristics for the 2.4 GHz Band
Unless otherwise indicated, typical conditions are: T
A
= 25 °C, VDD = 3.0V. RF center frequency 2.45 GHz.
Table 4.5. RF Transmitter General Characteristics for the 2.4 GHz Band
Parameter Symbol Test Condition Min Typ Max Unit
RF tuning frequency range F
RANGE
2400 — 2483.5 MHz
Maximum TX power
1
POUT
MAX
8 dBm output power — 8.2 — dBm
6 dBm output power — 6.4 — dBm
0 dBm output power — 0.3 — dBm
Minimum active TX Power POUT
MIN
8 dBm output power — -27 — dBm
6 dBm output power — -27 — dBm
0 dBm output power — -28 — dBm
Output power variation vs
VDD supply voltage varia-
tion, frequency = 2450 MHz
POUT
VAR_V
8 dBm output power with VDD
voltage swept from 1.8 V to 3.0 V
— 0.04 — dB
6 dBm output power with VDD
voltage swept from 1.8 V to 3.0 V
— 0.04 — dB
0 dBm output power, with VDD
voltage swept from 1.8 to 3.0 V
— 0.04 — dB
Output power variation vs
temperature, Frequency =
2450 MHz
POUT
VAR_T
8 dBm output power, (-40 to +105
°C)
— 0.9 — dB
6 dBm output power, (-40 to +105
°C)
— 0.3 — dB
0 dBm output power, (-40 to +105
°C)
— 1.3 — dB
8 dBm output power, (-40 to +85
°C)
— 0.8 — dB
6 dBm output power, (-40 to +85
°C)
— 0.4 — dB
0 dBm output power, (-40 to +85
°C)
— 1.0 — dB
Output power variation vs RF
frequency
POUT
VAR_F
8 dBm output power — 0.2 — dB
6 dBm output power — 0.2 — dB
0 dBm output power — 0.2 — dB
Note:
1. Supported transmit power levels are determined by the ordering part number (OPN). Transmit power ratings for all devices cov-
ered in this data sheet can be found in the Max TX Power column of the Ordering Information Table.
BGM220P Wireless Gecko Bluetooth Module Data Sheet
Electrical Characteristics
silabs.com | Building a more connected world. Preliminary Rev. 0.5 | 13