Data Sheet
Table Of Contents
- 1. Feature List
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Characteristics
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption with 3 V Supply
- 4.4 Radio Current Consumption with 3 V Supply
- 4.5 RF Transmitter General Characteristics for the 2.4 GHz Band
- 4.6 RF Receiver General Characteristics for the 2.4 GHz Band
- 4.7 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 1 Mbps Data Rate
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 2 Mbps Data Rate
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 500 kbps Data Rate
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 125 kbps Data Rate
- 4.11 High-Frequency Crystal
- 4.12 Low-Frequency Crystal
- 4.13 Precision Low Frequency RC Oscillator (LFRCO)
- 4.14 GPIO Pins
- 4.15 Microcontroller Peripherals
- 4.16 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
Confidential
Parameter Symbol Test Condition Min Typ Max Unit
Current consumption in EM4
mode
I
EM4
No BURTC, No LF Oscillator,
DCDC bypassed
— 0.17 — µA
Additional current in EM2 or
EM3 when any peripheral in
PD0B is enabled
1
I
PD0B_VS
— 0.37 — µA
Note:
1. Extra current consumed by power domain. Does not include current associated with the enabled peripherals. See for a list of the
peripherals in each power domain.
4.4 Radio Current Consumption with 3 V Supply
RF current consumption measured with MCU in EM1, HCLK = 38.4 MHz, and all MCU peripherals disabled. Unless otherwise indica-
ted, typical conditions are: VDD = 3.0 V. T
A
= 25 °C. Minimum and maximum values in this table represent the worst conditions across
process variation at T
A
= 25 °C.
Table 4.4. Radio Current Consumption with 3 V Supply
Parameter Symbol Test Condition Min Typ Max Unit
System current consumption
in receive mode, active pack-
et reception
I
RX_ACTIVE
125 kbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 4.5 — mA
500 kbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 4.5 — mA
1 Mbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 4.3 — mA
2 Mbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 4.8 — mA
System current consumption
in receive mode, listening for
packet
I
RX_LISTEN
125 kbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 4.4 — mA
500 kbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 4.4 — mA
1 Mbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 4.2 — mA
2 Mbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 4.7 — mA
System current consumption
in transmit mode
I
TX
f = 2.4 GHz, CW, 0 dBm output
power
— 4.8 — mA
f = 2.4 GHz, CW, 6 dBm output
power
— 8.8 — mA
f = 2.4 GHz, CW, 8 dBm output
power
— 10.8 — mA
BGM220P Wireless Gecko Bluetooth Module Data Sheet
Electrical Characteristics
silabs.com | Building a more connected world. Preliminary Rev. 0.5 | 12