Data Sheet
Table Of Contents
- 1. Feature List
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Characteristics
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption with 3 V Supply
- 4.4 Radio Current Consumption with 3 V Supply
- 4.5 RF Transmitter General Characteristics for the 2.4 GHz Band
- 4.6 RF Receiver General Characteristics for the 2.4 GHz Band
- 4.7 RF Receiver Characteristics for 802.15.4 DSSS-OQPSK in the 2.4 GHz Band
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 1 Mbps Data Rate
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 2 Mbps Data Rate
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 500 kbps Data Rate
- 4.11 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 125 kbps Data Rate
- 4.12 High-Frequency Crystal
- 4.13 Low-Frequency Crystal
- 4.14 Precision Low Frequency RC Oscillator (LFRCO)
- 4.15 GPIO Pins
- 4.16 Microcontroller Peripherals
- 4.17 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
Confidential
4.5 RF Transmitter General Characteristics for the 2.4 GHz Band
Unless otherwise indicated, typical conditions are: T
A
= 25 °C, VDD = 3.0V. RF center frequency 2.45 GHz.
Table 4.5. RF Transmitter General Characteristics for the 2.4 GHz Band
Parameter Symbol Test Condition Min Typ Max Unit
RF tuning frequency range F
RANGE
2400 — 2483.5 MHz
Maximum TX power
1
POUT
MAX
8 dBm output power — 8.2 — dBm
6 dBm output power — 6.4 — dBm
0 dBm output power — 0.3 — dBm
Minimum active TX Power POUT
MIN
8 dBm output power — -27 — dBm
6 dBm output power — -27 — dBm
0 dBm output power — -28 — dBm
Output power variation vs
VDD supply voltage varia-
tion, frequency = 2450 MHz
POUT
VAR_V
8 dBm output power with VDD
voltage swept from 1.8 V to 3.0 V
— 0.04 — dB
6 dBm output power with VDD
voltage swept from 1.8 V to 3.0 V
— 0.04 — dB
0 dBm output power, with VDD
voltage swept from 1.8 to 3.0 V
— 0.04 — dB
Output power variation vs
temperature, Frequency =
2450 MHz
POUT
VAR_T
8 dBm output power, (-40 to +105
°C)
— 0.9 — dB
6 dBm output power, (-40 to +105
°C)
— 0.3 — dB
0 dBm output power, (-40 to +105
°C)
— 1.3 — dB
Output power variation vs RF
frequency
POUT
VAR_F
8 dBm output power — 0.2 — dB
6 dBm output power — 0.2 — dB
0 dBm output power — 0.2 — dB
Note:
1. Supported transmit power levels are determined by the ordering part number (OPN). Transmit power ratings for all devices cov-
ered in this data sheet can be found in the Max TX Power column of the Ordering Information Table.
4.6 RF Receiver General Characteristics for the 2.4 GHz Band
Unless otherwise indicated, typical conditions are: T
A
= 25 °C, VDD = 3.0V. RF center frequency 2.45 GHz.
Table 4.6. RF Receiver General Characteristics for the 2.4 GHz Band
Parameter Symbol Test Condition Min Typ Max Unit
RF tuning frequency range F
RANGE
2400 — 2483.5 MHz
MGM220P Wireless Gecko Bluetooth Module Data Sheet
Electrical Characteristics
silabs.com | Building a more connected world. Preliminary Rev. 0.5 | 13