Data Sheet
Table Of Contents
- 1. Features
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Specifications
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption at 3.0V
- 4.4 Radio Current Consumption at 3.0V
- 4.5 RF Transmitter General Characteristics
- 4.6 RF Receiver General Characteristics
- 4.7 RF Receiver Characteristics for Bluetooth Low Energy at 1 Mbps
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy at 2 Mbps
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy at 500 kbps
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy at 125 kbps
- 4.11 High-Frequency Crystal
- 4.12 GPIO Pins
- 4.13 Microcontroller Peripherals
- 4.14 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
9. Soldering Recommendations
It is recommended that final PCB assembly of the BGM210P follows the industry standard as identified by the Institute for Printed Cir-
cuits (IPC). This product is assembled in compliance with the J-STD-001 requirements and the guidelines of IPC-AJ-820. Surface
mounting of this product by the end user is recommended to follow IPC-A-610 to meet or exceed class 2 requirements.
CLASS 1 General Electronic Products
Includes products suitable for applications where the major requirement is function of the completed assembly.
CLASS 2 Dedicated Service Electronic Products
Includes products where continued performance and extended life is required, and for which uninterrupted service is desired but not
critical. Typically the end-use environment would not cause failures.
CLASS 3 High Performance/Harsh Environment Electronic Products
Includes products where continued high performance or performance-on-demand is critical, equipment downtime cannot be tolerated,
end-use environment may be uncommonly harsh, and the equipment must function when required, such as life support or other critical
systems.
BGM210P Blue Gecko Bluetooth Module Data Sheet
Soldering Recommendations
silabs.com | Building a more connected world. Rev. 0.5 | 34