Data Sheet

2. Ordering Information
Table 2.1. Ordering Information
Ordering Code Protocol Stack TX Power Freq Band Antenna
Flash
(kB)
RAM
(kB) GPIO Temp Range Packaging
BGM210P022JIA2
1
• Bluetooth 5.1 10 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Cut Tape
BGM210P022JIA2R
1
• Bluetooth 5.1 10 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Reel
BGM210P032JIA2
1
• Bluetooth 5.1 20 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Cut Tape
BGM210P032JIA2R
1
• Bluetooth 5.1 20 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Reel
BGM210PA22JIA2
2
• Bluetooth 5.1 10 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Cut Tape
BGM210PA22JIA2R
2
• Bluetooth 5.1 10 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Reel
BGM210PA32JIA2
2
• Bluetooth 5.1 20 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Cut Tape
BGM210PA32JIA2R
2
• Bluetooth 5.1 20 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Reel
1. Engineering sample device
2. Production device
See 4.5 RF Transmitter General Characteristics for maximum TX power figures.
End-product manufacturers must verify that the module is configured to comply with the regulatory limits for each region, in accordance
with the formal certification test reports for the device.
BGM210P modules are pre-programmed with BGAPI UART DFU bootloader.
Throughout this document, the devices above may be referred to by their product family name (BGM210P), model name
(BGM210P22A / BGM210P32A) or full ordering code.
The SLWSTK6102A Wireless Gecko Module Starter Kit is available for BGM210P evaluation and development, as well as
SLWRB4308A (+20 dBm TX) and SLWRB4308B (+10 dBm TX) radio boards.
BGM210P Blue Gecko Bluetooth Module Data Sheet
Ordering Information
silabs.com | Building a more connected world. Rev. 0.5 | 3