Data Sheet
Table Of Contents
- 1. Features
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Specifications
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption at 3.0V
- 4.4 Radio Current Consumption at 3.0V
- 4.5 RF Transmitter General Characteristics
- 4.6 RF Receiver General Characteristics
- 4.7 RF Receiver Characteristics for Bluetooth Low Energy at 1 Mbps
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy at 2 Mbps
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy at 500 kbps
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy at 125 kbps
- 4.11 High-Frequency Crystal
- 4.12 GPIO Pins
- 4.13 Microcontroller Peripherals
- 4.14 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
5. Reference Diagrams
5.1 Network Co-Processor (NCP) Application with UART Host
The BGM210P can be controlled over the UART interface as a peripheral to an external host processor. Typical power supply, pro-
gramming/debug interface, and host interface connections are shown in the figure below. For more details, refer to AN958: Debugging
and Programming Interfaces for Custom Designs.
Figure 5.1. UART NCP Configuration
BGM210P Blue Gecko Bluetooth Module Data Sheet
Reference Diagrams
silabs.com | Building a more connected world. Rev. 0.5 | 21