Data Sheet
Table Of Contents
- 1. Features
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Specifications
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption at 3.0V
- 4.4 Radio Current Consumption at 3.0V
- 4.5 RF Transmitter General Characteristics
- 4.6 RF Receiver General Characteristics
- 4.7 RF Receiver Characteristics for Bluetooth Low Energy at 1 Mbps
- 4.8 RF Receiver Characteristics for Bluetooth Low Energy at 2 Mbps
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy at 500 kbps
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy at 125 kbps
- 4.11 High-Frequency Crystal
- 4.12 GPIO Pins
- 4.13 Microcontroller Peripherals
- 4.14 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
4.13 Microcontroller Peripherals
The MCU peripherals set available in BGM210P modules includes:
• 12-bit 1 Msps ADC
• Analog Comparators
• 16-bit and 32-bit Timers/Counters
• 24-bit Low Energy Timer for waveform generation
• 32-bit Real Time Counter
• USART (UART/SPI/SmartCards/IrDA/I2S)
•
I
2
C peripheral interfaces
• 12 Channel Peripheral Reflex System
For details on their electrical performance, consult the relevant portions of Section 4 in the SoC's datasheet.
To learn which GPIO ports provide access to every peripheral, consult 6.3 Analog Peripheral Connectivity and 6.4 Digital Peripheral
Connectivity.
4.14 Typical Performance Curves
Typical performance curves indicate typical characterized performance under the stated conditions.
BGM210P Blue Gecko Bluetooth Module Data Sheet
Electrical Specifications
silabs.com | Building a more connected world. Rev. 0.5 | 19