Data Sheet
Table Of Contents
- 1. Features
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Specifications
- 4.1 Absolute Maximum Ratings
- 4.2 General Operating Conditions
- 4.3 MCU Current Consumption at 3.0V
- 4.4 Radio Current Consumption at 3.0V
- 4.5 RF Transmitter General Characteristics
- 4.6 RF Transmitter Characteristics for 802.15.4 DSSS-OQPSK in the 2.4 GHz Band
- 4.7 RF Receiver General Characteristics
- 4.8 RF Receiver Characteristics for 802.15.4 DSSS-OQPSK in the 2.4 GHz Band
- 4.9 RF Receiver Characteristics for Bluetooth Low Energy at 1 Mbps
- 4.10 RF Receiver Characteristics for Bluetooth Low Energy at 2 Mbps
- 4.11 RF Receiver Characteristics for Bluetooth Low Energy at 500 kbps
- 4.12 RF Receiver Characteristics for Bluetooth Low Energy at 125 kbps
- 4.13 High-Frequency Crystal
- 4.14 GPIO Pins
- 4.15 Microcontroller Peripherals
- 4.16 Typical Performance Curves
- 5. Reference Diagrams
- 6. Pin Definitions
- 7. Design Guidelines
- 8. Package Specifications
- 9. Soldering Recommendations
- 10. Tape and Reel
- 11. Certifications
- 12. Revision History
2. Ordering Information
Table 2.1. Ordering Information
Ordering Code Protocol Stack TX Power Freq Band Antenna
Flash
(kB)
RAM
(kB) GPIO Temp Range Packaging
MGM210P022JIA2
1
• Zigbee
• Thread
• Bluetooth 5.1
10 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Cut Tape
MGM210P022JIA2R
1
• Zigbee
• Thread
• Bluetooth 5.1
10 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Reel
MGM210P032JIA2
1
• Zigbee
• Thread
• Bluetooth 5.1
20 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Cut Tape
MGM210P032JIA2R
1
• Zigbee
• Thread
• Bluetooth 5.1
20 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Reel
MGM210PA22JIA2
2
• Zigbee
• Thread
• Bluetooth 5.1
10 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Cut Tape
MGM210PA22JIA2R
2
• Zigbee
• Thread
• Bluetooth 5.1
10 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Reel
MGM210PA32JIA2
2
• Zigbee
• Thread
• Bluetooth 5.1
20 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Cut Tape
MGM210PA32JIA2R
2
• Zigbee
• Thread
• Bluetooth 5.1
20 dBm 2.4 GHz Chip and
RF pin
1024 96 20 -40 to 125 °C Reel
1. Engineering sample device
2. Production device
See 4.5 RF Transmitter General Characteristics for maximum TX power figures.
End-product manufacturers must verify that the module is configured to comply with the regulatory limits for each region, in accordance
with the formal certification test reports for the device.
MGM210P modules are pre-programmed with UART XMODEM bootloader.
Throughout this document, the devices above may be referred to by their product family name (e.g. MGM210P), model name
(MGM210P22A / MGM210P32A) or full ordering code.
The SLWSTK6102A Wireless Gecko Module Starter Kit is available for MGM210P evaluation and development, as well as
SLWRB4308A (+20 dBm TX) and SLWRB4308B (+10 dBm TX) radio boards.
MGM210P Mighty Gecko Module Data Sheet
Ordering Information
silabs.com | Building a more connected world. Rev. 0.5.1 | 3