Data Sheet

4.4 Radio Current Consumption at 3.0V
RF current consumption measured with MCU in EM1, HCLK = 38.4 MHz, and all MCU peripherals disabled. Unless otherwise indica-
ted, typical conditions are: VDD = 3.0V. T
A
= 25 °C. Minimum and maximum values in this table represent the worst conditions across
process variation at T
A
= 25 °C.
Table 4.4. Radio Current Consumption at 3.0V
Parameter Symbol Test Condition Min Typ Max Unit
Current consumption in re-
ceive mode, active packet
reception
I
RX_ACTIVE
125 kbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 9.3 — mA
500 kbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 9.3 — mA
1 Mbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 9.3 — mA
2 Mbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 9.9 — mA
802.15.4 receiving frame, f = 2.4
GHz, ZigBee stack running
— 9.4 — mA
Current consumption in re-
ceive mode, Stack running
I
RX_LISTEN
125 kbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 9.1 — mA
500 kbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 9.1 — mA
1 Mbit/s, 2GFSK, f = 2.4 GHz,
Bluetooth stack running
— 9.1 — mA
2 Mbit/s, 2GFSK, f = 2.4 GHz,
Bluetooh stack running
— 9.8 — mA
802.15.4, f = 2.4 GHz, ZigBee
stack running
— 9.2 — mA
Current consumption in
transmit mode
I
TX
f = 2.4 GHz, CW, 10 dBm Module,
0 dBm output power
— 16.1 — mA
f = 2.4 GHz, CW, 10 dBm Module,
10 dBm output power
— 34.1 — mA
f = 2.4 GHz, CW, 20 dBm Module,
10 dBm output power, VDD = 3.0
V
— 59.7 — mA
f = 2.4 GHz, CW, 20 dBm Module,
P
OUT
= 19.6 dBm, VDD = 3.3 V
1
— 181.3 — mA
f = 2.4 GHz, CW, 20 dBm Module,
P
OUT
=19.2 dBm, VDD = 3.3 V
2
— 173 — mA
Note:
1. The maximum power for when not using Bluetooth Low-Energy is limited to 19.6 dBm.
2. The maximum power for Bluetooth Low-Energy is limited to 19.2 dBm.
MGM210P Mighty Gecko Module Data Sheet
Electrical Specifications
silabs.com | Building a more connected world. Rev. 0.5.1 | 10