User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 94
www.energymicro.com
8.7.27 DMA_LOOP1 - Channel 1 Loop Register
Offset Bit Position
0x1024
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0
0x000
Access
RW RW
Name
EN
WIDTH
Bit Name Reset Access Description
31:17 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
16 EN 0 RW DMA Channel 1 Loop Enable
Loop enable for channel 1
15:10 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
9:0 WIDTH 0x000 RW DMA Channel 1 Loop Width
Reload value for N_MINUS_1 when loop is enabled
8.7.28 DMA_RECT0 - Channel 0 Rectangle Register
Offset Bit Position
0x1060
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0x000 0x000 0x000
Access
RW
RWH RWH
Name
DSTSTRIDE SRCSTRIDE
HEIGHT
Bit Name Reset Access Description
31:21 DSTSTRIDE 0x000 RW DMA Channel 0 Destination Stride
Space between start of lines in destination rectangle
20:10 SRCSTRIDE 0x000 RWH DMA Channel 0 Source Stride
Space between start of lines in source rectangle
9:0 HEIGHT 0x000 RWH DMA Channel 0 Rectangle Height
Number of lines when doing rectangle copy. Set to the number of lines - 1.