User manual
...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 719
www.energymicro.com
Bit Name Reset Access Description
LPF DISABLE VALUE Description
PLPFDIS x1 Disables the low pass filter between positive pad and positive
input.
NLPFDIS 1x Disables the low pass filter between negative pad and
negative input.
11:9 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
8 OPA2HCMDIS 0 RW High Common Mode Disable.
Set to disable high common mode. Disables rail-to-rail on input, while output still remains rail-to-rail. The input voltage to the opamp
while HCM is disabled is restricted between VSS and VDD-1.2V.
7 OPA1HCMDIS 0 RW High Common Mode Disable.
Set to disable high common mode. Disables rail-to-rail on input, while output still remains rail-to-rail. The input voltage to the opamp
while HCM is disabled is restricted between VSS and VDD-1.2V.
6 OPA0HCMDIS 0 RW High Common Mode Disable.
Set to disable high common mode. Disables rail-to-rail on input, while output still remains rail-to-rail. The input voltage to the opamp
while HCM is disabled is restricted between VSS and VDD-1.2V.
5:3 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
2 OPA2EN 0 RW OPA2 Enable
Set to enable OPA2, clear to disable.
1 OPA1EN 0 RW OPA1 Enable
Set to enable OPA1, clear to disable.
0 OPA0EN 0 RW OPA0 Enable
Set to enable OPA0, clear to disable.
29.5.15 DACn_OPAOFFSET - Operational Amplifier Offset Register
Offset Bit Position
0x058
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Reset
0x00
Access
RW
Name
OPA2OFFSET
Bit Name Reset Access Description
31:6 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
5:0 OPA2OFFSET 0x00 RW OPA2 Offset Configuration Value
This register contains the offset calibration value for OPA2. This field is set to the production OPA2 offset calibration value, hence
the reset value might differ from device to device. The field is sign-magnitude encoded. Higher values lead to lower OPA results.
The resolution of the LSB is 1.6mV/LSB