User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 699
www.energymicro.com
28.5.7 ADCn_IF - Interrupt Flag Register
Offset Bit Position
0x018
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0 0 0
Access
R R R R
Name
SCANOF
SINGLEOF
SCAN
SINGLE
Bit Name Reset Access Description
31:10 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
9 SCANOF 0 R Scan Result Overflow Interrupt Flag
Indicates scan result overflow when this bit is set.
8 SINGLEOF 0 R Single Result Overflow Interrupt Flag
Indicates single result overflow when this bit is set.
7:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 SCAN 0 R Scan Conversion Complete Interrupt Flag
Indicates scan conversion complete when this bit is set.
0 SINGLE 0 R Single Conversion Complete Interrupt Flag
Indicates single conversion complete when this bit is set.
28.5.8 ADCn_IFS - Interrupt Flag Set Register
Offset Bit Position
0x01C
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0 0 0
Access
W1 W1 W1 W1
Name
SCANOF
SINGLEOF
SCAN
SINGLE
Bit Name Reset Access Description
31:10 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
9 SCANOF 0 W1 Scan Result Overflow Interrupt Flag Set
Write to 1 to set scan result overflow interrupt flag
8 SINGLEOF 0 W1 Single Result Overflow Interrupt Flag Set
Write to 1 to set single result overflow interrupt flag.
7:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 SCAN 0 W1 Scan Conversion Complete Interrupt Flag Set
Write to 1 to set scan conversion complete interrupt flag.
0 SINGLE 0 W1 Single Conversion Complete Interrupt Flag Set
Write to 1 to set single conversion complete interrupt flag.